 |
The HT9201A/B tone dialers are CMOS LSIs designed for telecommunication systems. The HT9201A is for mute output whereas the HT9201B is for flash... |
R34.80
Add:
|
 |
A DTMF/Pulse dialler IC with memories featuring `Last Number'' and `Save'' redial. In addition, the device has three one-touch memories. The IC will... |
R33.87
Add:
|
 |
The Intersil ICL7106 and ICL7107 are high performance, low power, 31/2 digit A/D converters. Included are seven segment decoders, display drivers, a... |
R110.00
Add:
|
 |
The Intersil ICL7106 and ICL7107 are high performance, low power, 31/2 digit A/D converters. Included are seven segment decoders, display drivers, a... |
R107.81
Add:
|
 |
Precision Waveform Generator/Voltage Controlled Oscillator. The ICL8038 waveform generator is a monolithic integrated circuit capable of producing... |
R96.69
Add:
|
 |
The ICM7556 is a dual CMOS RC timer providing significantly improved performance over the standard SE/NE555/6 and 355 timers, while at the same time... |
R56.93
Add:
|
 |
Can be directly PCB mounted or plugs into standard 14-pin dual-in-line IC socket. Tin-plated contact. Contact rating 1A. Contact resistance 0.03 ohms... |
R13.62
Add:
|
 |
Can be directly PCB mounted or plugs into standard 16-pin dual-in-line IC socket. Tin-plated contact. Contact rating 1A. Contact resistance 0.03 ohms... |
R13.62
Add:
|
 |
Mates with 10-pin IDC socket e.g. PLB122. Two rows of straight PCB pins 2.5mm apart and 2.5mm pitch. Gold-plated over copper alloy pin. Contact... |
R7.88
Add:
|
 |
Mates with 16-pin IDC socket e.g. PLB123. Two rows of straight PCB pins 2.5mm apart and 2.5mm pitch. Gold-plated over copper alloy pin. Contact... |
R9.63
Add:
|
 |
Mates with 20-pin IDC socket e.g. PLB124. Two rows of straight PCB pins 2.5mm apart and 2.5mm pitch. Gold-plated over copper alloy pin. Contact... |
R11.15
Add:
|
 |
Mates with 26-pin IDC socket e.g. PLB125. Two rows of straight PCB pins 2.5mm apart and 2.5mm pitch. Gold-plated over copper alloy pin. Contact... |
R10.09
Add:
|
 |
Mates with 10-pin IDC header plug e.g. PLB102. Includes cable strain relief clamp. Polarity peg ensures socket can only be mated with the correct... |
R8.53
Add:
|
 |
Mates with 14-pin IDC header plug e.g. PLB103. Includes cable strain relief clamp. Polarity peg ensures socket can only be mated with the correct... |
R7.64
Add:
|
 |
Mates with 16-pin IDC header plug e.g. PLB103. Includes cable strain relief clamp. Polarity peg ensures socket can only be mated with the correct... |
R10.76
Add:
|
 |
Mates with 20-pin IDC header plug e.g. PLB104. Includes cable strain relief clamp. Polarity peg ensures socket can only be mated with the correct... |
R9.92
Add:
|
 |
Mates with 26-pin IDC header plug e.g. PLB105. Includes cable strain relief clamp. Polarity peg ensures socket can only be mated with the correct... |
R12.41
Add:
|
 |
Mates with 34-pin IDC header plug. Includes cable strain relief clamp. Polarity peg ensures socket can only be mated with the correct polarity. Gold-p... |
R10.56
Add:
|
 |
Mates with 40-pin IDC header plug. Includes cable strain relief clamp. Polarity peg ensures socket can only be mated with the correct polarity. Gold-p... |
R17.69
Add:
|
 |
Mates with 50-pin IDC header plug. Includes cable strain relief clamp. Polarity peg ensures socket can only be mated with the correct polarity. Gold-p... |
R25.67
Add:
|
 |
Panel-mounted plug for use as the incoming power connector for equipment up to 6A at 250V AC. Requires 26.5mm x 19mm panel cutout. Two 3mm clear... |
R57.50
Add:
|
 |
3-Pole IEC Panel Mount Plug with 6A 2-pole rocker switch and separate 20mm fuse carrier. Snap-in fixing. Panel Cutout: 47 x 26mm. Dims: 51 x 30 x 20 (... |
R80.50
Add:
|
