Fibre-glass single-sided copper clad circuit board, measuring 100X150
R35.58 Add:
Bright plated steel corner brace with wide radius suitable for cabinet reinforcement. Dims: 40 x 30 x 30mm
R11.66 Add:
Non-insulated Round Crimp Terminal 6mm. Tin-plated copper crimp terminal, non-insulated type. High quality solder-filled seams. Suits wires from 0.5 -...
R18.40 Add:
Connects either way round to set polarity. Outside diameter 3.0mm. Inside diameter 1.1mm.
R13.65 Add:
Low profile IC sockets with dual wipe contacts. Contacts are tin-plated phosphor bronze. Insulator is PBT reinforced with 30% glass fibre. Rated at...
R3.79 Add:
Right-angle 5-pin DIN plug with pins in a 180° arc. Solder connections.
R34.55 Add:
Panel-mounting 4-pin DIN socket. Solder connections. Overall size 28.5 x 19mm. Two 3mm fixing holes on 22mm centres.
R18.29 Add:
Tolerance ±20%. Lead length 30mm at each end. Operating temperature: -40°C to +85°C. Leakage current 0.01CV + 3uA. The complete range...
R1.59 Add:
Tolerance ±20%. Lead length 30mm at each end. Operating temperature: -40°C to +85°C. Leakage current 0.01CV + 3uA. The complete range...
R33.33 Add:
Suitable for use in switch mode power supplies. Very low impedance. High ripple current ratings. Wide operating temperature range. Tolerance ±2...
R10.56 Add:
Suitable for direct pcb mounting. Tolerance ±20%. Lead length 20mm for positive terminal and 15mm for negative. Operating temperature: -40°...
R8.53 Add:
Suitable for direct pcb mounting. Tolerance ±20%. Lead length 20mm for positive terminal and 15mm for negative. Operating temperature: -40°...
R2.13 Add:
Suitable for direct pcb mounting. Tolerance ±20%. Lead length 20mm for positive terminal and 15mm for negative. Operating temperature: -40°...
R24.60 Add:
Suitable for direct pcb mounting. Tolerance ±20%. Lead length 20mm for positive terminal and 15mm for negative. Operating temperature: -40°...
R5.75 Add:
7-Strand plain copper conductor. A PVC insulated wire intended for the internal wiring of electrical and electronic equipment. Sold in 1m and 100m...
R5.00 Add:
An inexpensive general purpose electrical tape, excellent conformability and high elongation polyvinyl chloride (PVC) film coated with an aggressive...
R30.23 Add:
FME male to TNC male in-line connector. Colour: Nickel
R51.39 Add:
GMA type glass fuse 20mm long and 5mm diameter. UL, CSA, MITI approved. Voltage rating 250V. Fuse will rupture within 1 hour at 1.35 times rated...
R17.25 Add:
GMA type glass fuse 20mm long and 5mm diameter. UL, CSA, MITI approved. Voltage rating 250V. Fuse will rupture within 1 hour at 1.35 times rated...
R20.70 Add:
3AG type glass fuses 32mm (1.25in) long and 6.35mm (0.25in) diameter. UL, CSA, MITI approved. Voltage rating 250V. Fuse will rupture within 1 hour at...
R18.17 Add:
3AG type glass fuses 32mm (1.25in) long and 6.35mm (0.25in) diameter. UL, CSA, MITI approved. Voltage rating 250V. Fuse will rupture within 1 hour at...
R18.17 Add:
Glass fuses 20mm (0.787 in.) long and 5mm (0.197 in.) diameter. UL, CSA, MITI approved. Voltage rating 250V. Fuse will rupture within 1 hour at 1.35...
R23.92 Add: