Product Image |
Item Name- |
Price |
 |
The properties of the lithium battery protection board: Model: 3S 12V 18650 Lithium Battery Protection Board Overcharge voltage range:... |
R214.58
Add:
|
 |
This kit makes creating your own robot easier than ever. Features pre-drilled mounting plates one DC motor + gearbox per wheel... |
R639.65
Add:
|
 |
2.8 INCH TOUCH SCREEN FOR ARDUINO® UNO/MEGA Features resolution: 240 RGB (H) x 320 (V) display driver: ILI9341 V0.7 ... |
R694.39
Add:
|
 |
A keypad is a simple method of entering user input into your project. Specifications dimensions: 7 x 7.7 x 0.1 cm connection : 3 col - 4 row, 7 pin... |
R81.10
Add:
|
 |
The MMA7455 accelerometer can measure acceleration in three axes. This sensor is commonly available as a breakout board that you can connect to your... Enquire at nearest Branch to confirm price and availability |
R218.36
Add:
|
 |
3.3 V / 5 V TTL LOGIC LEVEL CONVERTER MODULE This module allows to use 3.3 V sensors on a 5 V microcontroller. Features ... Enquire at nearest Branch to confirm price and availability |
R222.07
Add:
|
 |
3.3-5V 3-Wire Vibration Sensor Module Features: Comparative output, clean signal, good waveform, strong driving ability, more than 15mA.... |
R34.51
Add:
|
 |
This 4-channel relay interface board can control various appliances and other equipments with high current. It can be controlled directly by any... |
R284.52
Add:
|
 |
Dupont line 40 pin Male to Male 20 cm 40 PINS 30 cm MALE TO MALE JUMPER WIRE (FLAT CABLE) This flat cable can easily be... |
R84.50
Add:
|
 |
Specifications operating voltage: 5 VDC relay current rating: 10 A at 250 VAC, 10 A at 30 VDC (non inductive) relay contact: C, NO,... |
R170.23
Add:
|
 |
A small and versatile motor and driver set. This 5 VDC stepper motor controlled by the ULN2003 driver can be used with any Arduino® or... |
R255.73
Add:
|
 |
Features 210 pcs. resistor set (47K, 4,7K, 100K, 10K, 1K, 1M, 100R ) 5 x red LED 5 mm 5 x green LED 5 mm 5 x yellow LED 5 mm 4 x... |
R322.93
Add:
|
 |
Specifications operating voltage: 5 VDC buzzer frequency: 1.5 to 2.5 KHz connection: 3 pin, (-) and (S). (+) is not used ... Enquire at nearest Branch to confirm price and availability |
R142.60
Add:
|
 |
A dedicated and well-designed data logging shield for Arduino. SD card interface works with FAT16 or FAT32 formatted cards. The 3.3 V level shifter... |
R301.97
Add:
|
 |
The device includes an on-chip Hall voltage generator for magnetic sensing, an amplifier that amplifies the Hall voltage, a Schmitt trigger to... Enquire at nearest Branch to confirm price and availability |
R146.92
Add:
|
 |
This module can be used to send data by using infrared light. Commonly used in remote controls. Specifications max. current: 20 mA... |
R156.65
Add:
|
 |
High sensitivity sound detection module with 2 outputs. AO - analog output, real-time output voltage signal of the microphone. DO - the digital... |
R80.99
Add:
|
 |
A Reed contact switch is a normally open contact which closes in the presence of a magnetic field. This modules contains a 10 Kohm pull-up resistor.... |
R160.43
Add:
|
 |
ARDUINO® COMPATIBLE MOS DRIVING MODULE Specifications operating voltage: 3 to 5 VDC max. load voltage: 0 to 24 VDC input:... |
R187.52
Add:
|
 |
RGB LED module with on-board current limiting resistors. Specifications voltage: 5 VDC connection : 4 pin male header pins: GND, RED, GREEN, BLUE... |
R148.55
Add:
|
 |
This module contains a push button and a 10 K pull-up resistor. Specifications voltage: 5 VDC connection: 3 pins, +(middle pin), ground and DO (data... |
R155.83
Add:
|
 |
The Arduino Motor Shield is based on the L298, which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and... Enquire at nearest Branch to confirm price and availability |
R1,082.81
Add:
|